iPhone Speaker Cleaner

Tuned pulses for iPhone speakers, from iPhone 11 to the newest iPhone 18 Pro Max — clears water after a splash and dust from the bottom grille.

Turn the volume to maximum and turn off silent mode — the cleaning sound needs full power.

⚠️ Safety first: never charge a wet phone, and don't wear headphones while cleaning — the tones are strong. Read the full safety guide.

Need a deeper clean?

How It Works

Four simple steps. The whole clean takes about a minute.

1

SET VOLUME TO MAX

Turn your media volume to 100% and turn off silent mode. The cleaning sound needs full power to shake the speaker properly.

2

SOUND + VIBRATE

This page is already set for iPhone. Leave Sound and Vibrate on together for the strongest clean — or use just one of them.

3

PRESS START — SPEAKER DOWN

Hold the device with the speaker facing down on a soft, dry towel. Gravity helps the water and dust fall out while the sound plays.

4

LISTEN & REPEAT IF NEEDED

Play some music and listen. Still muffled? Run the tool once or twice more — most speakers become clear within 1 to 3 cycles.

About iPhone Speakers

iPhones pick up pocket dust fast, and one splash is enough to make the speaker sound like it is under water. The good news: most of the time nothing is broken — the grille is just blocked, and sound pulses can push the blockage out.

Where the speaker is: Your iPhone's main speaker sits on the bottom edge, next to the charging port. The earpiece speaker is at the top, inside the thin slot above the screen.

Pick your exact model:
iPhone 11iPhone 12iPhone 13iPhone 13 Pro MaxiPhone 14iPhone 15iPhone 16iPhone 16 Pro MaxiPhone 17iPhone 17 Pro MaxiPhone 18 ProiPhone 18 Pro Max
Honest note: this tool cleans water and dust from the speaker opening, and it fixes most muffled or low sound. It cannot repair a broken speaker or water damage inside the phone — for that, please visit a repair shop. Never charge a wet phone.

Questions

Short answers, no confusing words.

Is this tool free?

Yes — completely free. No app to install, no sign-up, and nothing is uploaded anywhere. The sound is made inside your browser.

Will it damage my speaker?

No. The tones are inside the range phone speakers are built for, and the volume rises slowly. If any sound ever feels too harsh, press STOP — it stops at once.

How many times should I run it?

Run it once, then test with music. For water, 2–3 cycles are normal. Please do not run more than 3 cycles back-to-back — let the speaker rest a few minutes.