Vibration Cleaner

Strong low pulses that shake stubborn dust and sand out of the speaker grille.

Turn the volume to maximum and turn off silent mode — the cleaning sound needs full power.

⚠️ Safety first: never charge a wet phone, and don't wear headphones while cleaning — the tones are strong. Read the full safety guide.

Need a deeper clean?

🤔 Not sure? Quick Check

Tap your problem — the right mode gets selected for you.

How It Works

Four simple steps. The whole clean takes about a minute.

1

SET VOLUME TO MAX

Turn your media volume to 100% and turn off silent mode. The cleaning sound needs full power to shake the speaker properly.

2

SOUND + VIBRATE

This page is already set for your phone. Leave Sound and Vibrate on together for the strongest clean — or use just one of them.

3

PRESS START — SPEAKER DOWN

Hold the device with the speaker facing down on a soft, dry towel. Gravity helps the water and dust fall out while the sound plays.

4

LISTEN & REPEAT IF NEEDED

Play some music and listen. Still muffled? Run the tool once or twice more — most speakers become clear within 1 to 3 cycles.

Honest note: this tool cleans water and dust from the speaker opening, and it fixes most muffled or low sound. It cannot repair a broken speaker or water damage inside the phone — for that, please visit a repair shop. Never charge a wet phone.

Questions

Short answers, no confusing words.

Is this tool free?

Yes — completely free. No app to install, no sign-up, and nothing is uploaded anywhere. The sound is made inside your browser.

Will it damage my speaker?

No. The tones are inside the range phone speakers are built for, and the volume rises slowly. If any sound ever feels too harsh, press STOP — it stops at once.

How many times should I run it?

Run it once, then test with music. For water, 2–3 cycles are normal. Please do not run more than 3 cycles back-to-back — let the speaker rest a few minutes.